'69 340 Swinger 4-speed clutch linkage

Make sure the rod hat goes through the firewall is not worn. The hole is "D" shaped and sharp line. the holes wear and get elongated. either weld more material and shape it or purchase new clutch rod.

The bushings could be worn on the clutch pedal under the dash. Just had a spare set of pedals rebuilt and then installed them. The master cylinder is attached to this assembly as is the column. The overcenter spring is tricky to take off and re-install and dangerous if not watched!! load the spring with washers to keep expanded to remove and do not take out washers until reinstalled.

Before taking pedals out, try to have a back up set as the pedal arm could be worn and that would mean a replacement.

Under lots of pressure so take time and have a helper.