Possible brake upgrade.

I was at the shop the other day and saw a 94 4runner. To my amazement it had a 4 piston caliper! My first reaction was, those would rock on the dart. Anyway i did a bit of research and it looks possible.

The 4 runner rotor diameter is 11.75 If I'm not mistaken you can swap bigger rotors from a later model mopar onto the dart that are 11.75. So that makes the rotors easy to get. The MC bore size on this toyota is listed as 1" or 1 1/16". Power disc dart mcs are listed as 1 1/32" sounds like a win there as well. I was thinking also you could probably make a real short piece of brake line off the mc to go from the toyota threads to the mopar threads and use your stock rubber lines. Then the hardest part would be making a bracket but, that is certainly not out of the realm of possibility.

Approximated cost breakdown:
2 calipers: $150
2 rotors $100
brake line adapter things: $15
Brake pads: $30
total: $295 (not counting costs for fabricating a bracket)

Any thoughts?

I know they have some brackets to use willwood calipers or viper calipers but those are both pretty pricey and not something the parts store will have in stock. heck if you could grab the calipers and rotors from a junkyard you might be able to do this pretty cheap!