Kick down linkage help

Hi Clark, Im no expert, but to my knowledge the carb stud should be touching the oval hole on the kickdown all the time. Now there is a spring that goes from your kickdown linkage to the carb stud. This spring helps to keep the kickdown in constant contact with the carb stud. At wot, the carbstud should be pushing the linkage back to max.....that means you should have very very little movement 1/8-1/4" (pushing down on kickdown linkage)Here is a thread I started trying to figure the same thing out.

http://www.forabodiesonly.com/mopar/showthread.php?t=197535