1967 Barracuda Assorted Interior Parts - USED

-
Status
Not open for further replies.
Old Moparz

Old Moparz

Well-Known Member
Joined
Jul 14, 2008
Messages
101
Reaction score
10
Location
Newburgh, NY 12550
Rating - 100%
2   0   0
Contact seller
1967 Barracuda - Assorted Interior Parts

(Be sure to check the photobucket link for lots of photos)

Photos Here:
http://s469.photobucket.com/albums/r...acuda%20Parts/

All of the following were removed from a 1967 Barracuda Fastback 15 years ago & stored indoors. Some of the parts are interchangeable with other years & body styles & some aren't so make sure you verify what you need. What is listed is all I have.

Accelerator Pedal & Linkage (moves freely, not corroded) ................. $25

Air Duct w/ Metal Door (hinge bent & stuck) .................................. $10

Flexible Vent Hoses & Duct (no cracks - 3 pieces total) ......... $15 / 3 pcs

L & R Large Stainless "L" Shaped Trim (has push in fasteners)...... $20 / pr

Long "Another I don't Know Where It Goes" Moulding ........................ $5

Assorted Switches, Knobs, etc. (18 parts, condition unknown) ..... $5 / all

L & R Lower Door Hinges ...................................................... $20 / pr

Plastic Certicard Holder (warped, but not broken) ............................ $1

Dash & Firewall Harness (some cuts, mostly complete w/ plugs) ........ $45


All parts will be packed safely at no charge in a sturdy cardboard box with actual packing materials, not newspaper & crossed fingers. I am in Newburgh, NY - 12550.

Postal money order & paypal are fine, or cash if paid for & picked up in person. All prices are for parts only & buyer to pay actual shipping fees.

Thanks, Bob
 

Attachments

  • A-Body 0038 b.jpg
    55.2 KB · Views: 872
  • A-Body 0031 b.jpg
    62.5 KB · Views: 844
  • A-Body 0047 b.jpg
    48.1 KB · Views: 816
  • A-Body 0034 b.jpg
    60.4 KB · Views: 864
  • A-Body 0042 b.jpg
    64.3 KB · Views: 840
  • A-Body 0049 b.jpg
    32.6 KB · Views: 821
  • A-Body 0048 b.jpg
    46.6 KB · Views: 821
  • A-Body 0041 b.jpg
    61.3 KB · Views: 854
  • A-Body 0012 b.jpg
    77.1 KB · Views: 854
I don't really need the rear compartment moldings but I DO need the clips if you're willing to sell them separately. Make me a paypal offer I can't refuse. :-D
 
CudaChick1968 said:
I don't really need the rear compartment moldings but I DO need the clips if you're willing to sell them separately. Make me a paypal offer I can't refuse. :-D
Click to expand...


I don't have a problem with selling them separately but will have to check to make sure they are not rusted & ready to break in my hands when they are removed.

Any idea how many there are supposed to be all together?

Have you tried aftermarket suppliers for repro clips?

I'll risk losing a sale, but there is a place right here in Newburgh, NY where I am, that sells all types of fasteners called Hudson Fasteners. Been there forever.

845-565-3843

http://www.facebook.com/pages/Mid-Hudson-Fasteners-Inc/203668483003181?sk=info

I used to have a catalog from them that was 2" thick & had EVERYTHING.

Bob
 
Thanks for the quick reply Bob. I did find them through Mr. G's Fasteners a year or so ago but just never pulled the trigger on the order. (I've had my Cuda for over 21 years and spend most of my time working on other people's stuff rather than my own. It's not exactly a rush project. :-D) If I remember right, there are 22 or 24 but I'm not positive. It's been awhile since I mocked them up.
 
CudaChick1968 said:
Thanks for the quick reply Bob. I did find them through Mr. G's Fasteners a year or so ago but just never pulled the trigger on the order. (I've had my Cuda for over 21 years and spend most of my time working on other people's stuff rather than my own. It's not exactly a rush project. :-D) If I remember right, there are 22 or 24 but I'm not positive. It's been awhile since I mocked them up.
Click to expand...


I looked at what was still attached to the mouldings & some of them are missing. One side has 6 clips & the other has 4, so it seems like you'll need to get some from somewhere else anyway. They aren't rusted, but it isn't a full set.

Sorry.
 
PSUKev said:
Do you know what these L shaped pieces trim around? Also, I know these are large pieces, would you be willing to ship them? Thanks.
Click to expand...


If I am correct on the 2 pieces you are referring to, they should go to where the arrows point in the photo. No problem shipping, but please remember that it could be an oversized package & cost more to ship than the parts themselves. Let me know if these are the ones.

Thanks, Bob
 

Attachments

  • Cargo Area L&R Mouldings 01.jpg
    47.2 KB · Views: 506
A big thanks to those who have purchased some of these parts, it helped clear out some much needed space & offset the cost of getting a few parts I needed for my Scamp. :thumbup:

Here's an update of what has been sold & what is still left.........

Interior:
1) Accelerator Pedal & Linkage (moves freely, not corroded) ......................... $25
2) Air Duct w/ Metal Door (hinge bent & stuck) ............................................. $10
3) Flexible Vent Hoses & Duct .......................................... SOLD
4) L & R Large Stainless "L" Shaped Trim (has push in fasteners) ............. $20 / pr (over sized item)
5) Long Rear Interior Moulding (not sure of location) ........................................ $5
6) Assorted Switches, Knobs .......................................... SOLD
7) L & R Lower Door Hinges .................................................................. $20 / pr
8) Plastic Certicard Holder ............................................. SOLD
9) Dash & Firewall Harness (some cuts, mostly complete w/ plugs) ................. $45
10) Rear Folding Seat .................................................... SOLD
11) Misc. Rear Interior Trim ............................................. SOLD
12) L & R Carpet Mouldings ............................................. SOLD
13) L & R Door Panel Mouldings (good condition) ...................................... $5 / pr
14) L & R Upper Door to Quarter Rubber Seals .......................................... $5 / pr
15) L & R Black Door Jamb Rubber Edges ................................................. $5 / pr
16) L & R - Black Metal Covers ......................................... SOLD
17) Interior Divider ......................................................... SOLD
 
Here's another update of what has been sold & what is still left.........

Interior:
1) Accelerator Pedal & Linkage (moves freely, not corroded) ......................... $25

2) Air Duct w/ Metal Door (hinge bent & stuck) ............................................. $10

3) Flexible Vent Hoses & Duct ........................................... SOLD
4) L & R Large Stainless "L" Shaped Trim ............................. SOLD
5) Long Rear Interior Moulding .......................................... SOLD
6) Assorted Switches, Knobs ............................................ SOLD

7) L & R Lower Door Hinges .................................................. ................ $20 / pr

:cool: Plastic Certicard Holder ............................................... SOLD
9) Dash & Firewall Harness ............................................... SOLD
10) Rear Folding Seat ..................................................... SOLD
11) Misc. Rear Interior Trim .............................................. SOLD
12) L & R Carpet Mouldings .............................................. SOLD
13) L & R Door Panel Mouldings ......................................... SOLD

14) L & R Upper Door to Quarter Rubber Seals .......................................... $5 / pr

15) L & R Black Door Jamb Rubber Edges ................................................. $5 / pr

16) L & R - Black Metal Covers ......................................... SOLD
17) Interior Divider .................................................. ....... SOLD
 
Status
Not open for further replies.
-

Back
Top