Turning a 74 into a 72
Here's Larry doing the dirty deed!
And here's a couple of the hood after the cut and polish.
Pretty easy time of it this time. Just been going over it with 1500 grit then 2,000 grit, and I've been using a 3,000 grit pad last. Then I cut it with 3M rubbing compound and a wool pad, next I used 3M machine polish #2 with a foam pad, and lastly I'm going to use 3m ultra fine machine polish with a foam pad.
So far it really looks good. I have the front clip just about done and will be starting on the roof next.
I'm hoping to get the paint finished by this week end so I can clean it up and get a good look at it outside,
Well back to work!
Here's Larry doing the dirty deed!
And here's a couple of the hood after the cut and polish.
Pretty easy time of it this time. Just been going over it with 1500 grit then 2,000 grit, and I've been using a 3,000 grit pad last. Then I cut it with 3M rubbing compound and a wool pad, next I used 3M machine polish #2 with a foam pad, and lastly I'm going to use 3m ultra fine machine polish with a foam pad.
So far it really looks good. I have the front clip just about done and will be starting on the roof next.
I'm hoping to get the paint finished by this week end so I can clean it up and get a good look at it outside,
Well back to work!