Wheelie Bars

SP3188 said

I`m not afraid to ride it out but both times it didn`t go straight.the track is narrow and sheet metal is too hard too find. on the second pass i had different snubbers on the front. I ordered a set of drag shocks for the front this am. can`t lower the rear without cutting up the car or narrowing the dana.

Click to expand...

OK, I understand about the narrow track and all. If the car isn't going straight you'll still need to do something about it though. I had a 29.5x11.5 tire on a 10" rim with a stock width rear axle in my Duster. It was mini tubbed and the springs moved inboard. I had to massage the front and rear of the wheel opening but they fit in there with some room to spare.

That may be a better deal than what you have now. As stated earlier the stored energy you have there is just asking for trouble. If you don't want to cut the car then CalTracs are probably your best solution.