Solid-State Voltage Regulator Conversions

So you want to end up with a 12V regulator essentially in the 6V case? Yea, a photo of the regulator is required. You MAY be able to find an existing 12v one and fit it in the case.

If the generator you want to use has a stamped tag no. you need to refer to that to get the correct regulator

As I said earlier----------

the amperage of the regulator must match or be smaller than the generator

the CIRCUIT must match, IE "A" or "B" field

But BOTH the above will be taken care of if you go by the generator number.

If it's a rebuild and the original tag has been destroyed, about all you can do is guess by application, and "lean" towards a smaller amperage, rather than larger, regulator.