Still issues with the car not starting!

LovetheA's said
73Abodee

That is a great point. My relay doesnt have a tab at that point. It looks as if that area is manufactured without it. It is just a flat metal area. If that is the case how would they ground the starter relay? I'm pretty sure in 67 a barracuda 4 speed car didn't have a neutral safety swtich. To make matters worse I just went downstairs and decided to try to start up the car. I haven't run it since I put it away on Sun. I figured it is going to be dead. Well it fired right up. There was no problem. So now it appears as if when the car was hot the problem was there. I am confused?

Carl

if you have no provision on your relay for any ground or safety switch, the relay needs to be grounded at its mounting point on the fender apron or wherever it is mounted. you could switch it out for a later one like above and just run a ground wire to the body if you wanted to. sometimes when these things use the case as a ground, it can be hit and miss. just like people are having problems with a good ground with their ECU boxes.