DionR said

These will work on any LA motor, with pre-magnum heads. Unless you swapped the heads on your motor, you will need a vertical bolt arrangement. You can buy a pre-made setup from Mopar, or you could buy these and bend the feet, or you could even bend and cut up a 2bbl setup, too. That's pretty much what I did when I put magnum heads on my 360, but I used a 4bbl throttle spring bracket and bent and cut the 2bbl throttle cable bracket. Can't really see in this picture, but it's all I've got.



Only really issue you will have with that is you will still need a kickdown rod from the carb to the linkage.

Hope that helps.

Click to expand...