Upper Control Arm Offset Bushings Gap Question

Judge Mills said

Moe: I might have to take you up on that.,I will let you know.


This is what Raybestos wrote me today: These parts are all rubber. I do not have one with a steel clad on the outside.

So now what?

Click to expand...

I would ask why the cam bolts are excessively loose when installed through the bushings. Tell them that the worn out bushing would hold an alignment better than the new Raybestos you have.

And when you copied the Moog bushings you forgot to copy their washers that insert in the ends of the busings.