Pressure Pot

Thanks 440! Reason I ask is a tech service rep at work suggested using one. He works for us now, but he was a professional painter at Boeing for years. Myself I have a little experience with air assist and airless assist, both electrostatic. If I understand it correctly, you set up the gun with the fan pressure off, and adjust the pressure until you get a stream that breaks about 2 feet from the gun, then you adjust the fan. I have a 3M pps system now, but man it gets heavy when you're spraying a quart at a time. You have to change over several times on a car. I was thinking that with a 2 quart pot, I wouldn't have to lift the gun with paint a lot. If I had a lot of experience painting, it wouldn't be that much of an issue. Oh, we do have a 1.4mm SATA at work specifically for pressure pots, it has the feed at the bottom. Any more experiences/ opinions is welcome.