Another head inquiry...

OK, so I found a set of 915s on feebay...they should be on my porch in about a week :cheers:

As mentioned in previous posts with my 516s, I still intend to open up the bowls for bigger valves. I haven't checked the pricing on it yet, but I'd also like to have hardened seats installed and a 3 angle valve job plus back cutting the new valves...

I found a cam I liked in the classifieds here...Crane hyd roller 284/292 total...222/230 @ 050...509/528 lift on a 112 lsa. I also picked up a set of adjustable ductile rockers and some springs from the classifieds too! yay! Progress is slow as molasses sometimes, but I do still have occasion to get some parts and play around here and there. As unfortunate as it is, I'll probably have to send my engine outta town for machining since most places around here [that I trust] are back-logged for months.

If you guys have some suggestions on setup for these heads, I'm all ears...If I do any porting on them, it'll probably be just bowl work or basic port cleanup-nothing extensive as I don't really want to turn them into a boat anchor. Thanks again y'all...