Engine Cutting Out! What to check?

I had a miss in my motor and it turned out to be low battery voltage. I read you are running 8psi of fuel pressure. Try turning it down to 6psi this will cause less fuel aeration. A friend of mine try this and picked up more than a tenth in the 1/4. Hope this helps you with your problem. Good luck Tom

I'll check the battery again, but I'm pretty sure it's good. From what I'm finding, I am getting more voltage through the system than there should be. The voltage spikes to 40 volts at times at the coil and at the ballast resistor. I changed the voltage regulator and that didn't do anything. So the problem lies elsewhere.

I would highly doubt aeration would be the issue. I'm running a bypass system which "should" virtually will eliminate that problem. The pressure doesn't fluctuate or anything at all.

Here's some pictures of the plugs. They looked really dark when I took inside pictures so I took some outdoor pictures as well. My camera actually picked up a lot of stuff on the plugs that I couldn't see very well with the naked eye. The pictures won't be big enough on here to see what I can see when they are full size, but here ya go.