Florida "Key Lime" 76 Duster Build

If you remember, I previously used plastic templates to mark the underside of the trunk lid for the correct factory holes used for rear Go-Wing mounting. I'm ready to mount the actual brackets now.....they have to be screwed into the lid, and then they provide a flat reinforced surface by which to properly hold down that spoiler......without these brackets, you have holes drilled through the lid into sharply angled steel surfaces......

I put the Go-Wing together and got it ready to mount.....Pretty easy.....Small brackets screw down and hold the pedestal in place.....I ran a tap through the adjuster holes to get rid of the excess paint from the factory, then inserted the tempered allen bolts which are used to adjust the angle of the spoiler for more or less downforce.