Need help finding a pully
- Thread starter 1973dusterkid
- Start date
-
- Status
Pentastarnut
67' Barracuda
try these doods ;)
http://bouchillonperformance.com/
http://bouchillonperformance.com/
1973dusterkid
Watch This
Ok so I have the pullys lined up and when I put the ps pump on the pully did not line up so how would I know what pully to use.
abodyjoe
Well-Known Member
what pump do you have? saginaw or federal?
sure you have the proper pulleys on the water pump and crank and proper alt brackets?
pictures of your set up would help..
sure you have the proper pulleys on the water pump and crank and proper alt brackets?
pictures of your set up would help..
1973dusterkid
Watch This
Cant get pics till I get home the brackets and pump are off a 318 going on a 360.
abodyjoe
Well-Known Member
are they all matched? no a/c pulleys and brackets or all a/c brackets and pulleys??
get pictures when ya get home. we will be able to help ya out better. a wp change shouldn't have screwed things up unless its the wrong pump.
get pictures when ya get home. we will be able to help ya out better. a wp change shouldn't have screwed things up unless its the wrong pump.
1973dusterkid
Watch This
Heres some pics are the 318/360 pumps and brackets the same
Bulldozer
free ice cream sandwiches
just shim out the power steering pump. i wouldnt change the PS pump pulley over that. i agree with Joe. that top pulley looks funky anyway. are you trying to use an AC top pulley with a non air bottom? the power steering rides the outside crank groove and the alt , water pump ride the inside crank groove
abodyjoe
Well-Known Member
these are the parts you need to make things line up properly..
not 100% sure whats up with your steering pump mount. never saw one that looks liek that one..
use the measurements below to make sure you gatrher the proper pulleys..
not 100% sure whats up with your steering pump mount. never saw one that looks liek that one..
use the measurements below to make sure you gatrher the proper pulleys..
1973dusterkid
Watch This
Holly S^%# thats alot of money for pullys were can I buy a full matched set.
Not sure what pullys these are it a mix.
Were can I get
Water pump
Crank
PS
Not sure what pullys these are it a mix.
Were can I get
Water pump
Crank
PS
abodyjoe
Well-Known Member
just use the pics i posed for the measurements.. those pulleys will pop up in the classified section from time to time..
looks like some also came on dakotas so look at junk yards also..
looks like some also came on dakotas so look at junk yards also..
MoparGod
Well-Known Member
I should have them. PM me.
highflyer
Well-Known Member
looks like you have early model pulleys not 70s pulleys...if you cant find what you need,i have a cleaned primered painted set for a 75 318..they are a matched set..my last set tho..60 plus shipping from antioch cal.pm me for p[ics if interested...j
66durgederp
"pull hard, itll come easy"
most 70s era trucks were smallblocks and didnt have a/c but did have power steering. thats where i got mine (from my ol 73 D100 actually)
- Status
-
