416 Stroker EQ heads

The time has come to sell my latest EQ headed smallblock. This engine was built for the 2012 EMC (EngineMasters Challenge). It features:

10.3 compression (91 pumpgas no problem)
Eagle 4340 4" crank
Scat I beam rods
Icon dish forged pistons .07"
360 block, short fill, studded, line honed, decked, plate honed etc....
EngineQuest heads ported extensively-2.08" 1.60" flow 303-304 cfm @ .600"
Eddy SV
T&D 1.5 shaft rockers
Custom Comp cam 250/252 @.05" .663"/.590" hydraulic roller
Scorpion hydraulice roller lifters


A couple of notes: This engine will be featured in an upcoming issue of Popular HotRodding Magazine. It was disassembled for the photo shoot and as such needs to be reassembled for no additional charges of course.
This engine does not exhibit the power drop off above 5500 rpm that most 4" stroke small blocks with "small" heads usually experience.
The asking price is $8000.00 with no EZE-EFI or carb, those would be extra.
This engine is located in Eastern Ontario Canada. Here's some additional reading with info. http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=7369324&page=0&fpart=2&vc=1 J.Rob