Just a little miffed...

alright i went home at lunch and pissed off the neighbors and the landlord :finga: so i re-checked my static, it crept on me, 17.5, checked mechanical advance, 24 degrees....plateaus off at 2600 then oh geez at 2900-3200 an additional 5 degrees shows its face and then thats all until 4000 rpm....great got a weight sticking....so time for a dizzy re-spring and find out why the weights hanging up....anywhore reset the static to 12.5, retweak the idle mix screws, recheck the total advance, now 37 degrees, plug in the vac adv aaaand......idles a little bit, just a little bit rougher but its plenty good enough for me, right at 700 too, the exhaust poof poof pluhh is still there but i still gotta check for leaks and compression/leakdown test, however in decelleration it doesnt do the annoying pluh pluh poof poof poof sounds anymore. now when i check overall timing with the vac adv hooked up what kind of reading should i expect? i didnt have time to do that....and my neighbor was getting pretty hot...