1965 Dodge Dart Charger

The new found hobby glass beading took me some 3+ hours to get one center from the Cragar S/S wheels incl the special nut for the rear resonator and the door striker done!!! My axle actually hurted when I was finished.

On top of that the stamp for the rear axle took almost 2 hours to manufacture. But the result was great. 463 is the number to be found on the broadcast sheet in the box "axle". 463 stands for 7 1/4 rear end with 3,23 gear ratio and 10 inch brakes.

I had spray can of school bus yellow that I used for the rear brake springs. Sprays on a piece of woodsomepaint, dipped the stamp and stamped the front of the left axle tube. I was satiesfied with the result.