Electrical gremlin. Dart won't start. Desperately seeking insight!

Alright. Was able to spend a little time checking things out today.

First thing I checked was the bulkhead connectors. I pulled all three and there was a bit of corrosion build-up. a few sprays of contact cleaner and some di-electric grease and that was taken care of... but still no start.

Okay, tested start relay. Works fine when jumped. Tried jumping with the key at "run" and while it would crank like a champ, still no start. Checked for spark while cranking. None.

Okay, so things are pointing toward something on the backside of the firewall. I was loosing light, so I just pushed the dart across the street and I'll do more work tomorrow. Just for ***** and gigles, I decided to turn the key after pushing it across the street... Vrooom!!! Damnitall.

I'm definitely thinking ignition switch of the wiring thereof. My logic is it started because of all the cranking/pushing on the steering wheel while getting it across the road.

I'll report back after poking around a bit more. First thing on tomorrow checklist is rnaz'z suggestion of the ign. switch plug.

~Rev