Thanks for your reply..looking at year one I am not sure which one I would need out of the listed ones. Suppose I should have mentioned the car and year lol. Its a 73 dart sport. Heres what I see at year one
https://www.yearone.com/Catalog/1966-74-a-b-e-body/electrical
thanks again.
I don't see on for a 73 but I believe the 72 is the same. I believe this because I have a 74 harness in my 72 and I replaced the engine harness with the one I got from year one (1972 engine harness with electronic ign)
The numbers I quoted are for a small block. If it now has a 400 then you need one for a big block. Again I'd call to make sure.
Part # for Year One is: HU235A is for electronic ign
Part # HU236A without.
Only $119
You may want to phone them to verify the fitment or maybe someone else on here can chime in.
Search this site and you will come up with the wiring diagrams you need. It is really easy once you have the diagram.
I would strip all the old tape/covering from your existing wiring. That way you will be able to remove the old engine harness and solder the other butchered connections. You can buy the new wrap or just use hockey stick wrap, strong stuff, looks similar to factory and cheap.
