lets talk pan gaskets and rear main seals
whoops. NEVERMIND....read this thread. do not use that one piece rubber seal. its for a magnum motor only. use the MILODON crushproof oil pan gasket.
http://www.forabodiesonly.com/mopar/showthread.php?t=203796&highlight=oil+pan+gasket
http://www.summitracing.com/parts/mil-40650
Yeah I remember that thread now. I did state that the magnum gasket doesn't fit right but the OP said he used a Fel-pro gasket which shows to be a magnum gasket. AutoX also said the magnum gasket didn't fit right but I didn't see where the Milodon was specifically mentioned, just Fel-pro and Detroit gasket.
I just did a search to see if I could verify what it's really for (LA or Magnum) and this is the only one I came up with that says it fits an LA but at the same time a couple of guys say the magnum gasket works fine on an LA, which I know is wrong cause me and AutoX have tried it. I guess take this thread with a grain of salt
http://board.moparts.org/ubbthreads...age=1&Main=5858423&Words=&topic=1&Search=true
Out of 3400 hits on Google I found no definete proof that the Milodon actually fits. Even Milodon's website just says it's for a 360 Mopar, doesn't say LA or Magnum.
With that said buy at your own risk. At least Summit is good about taking back stuff if it doesn't fit. Use their return label and it won't cost anything except time so if you order it way in advance you'll be ok.