pcv set up

Recently i had been told i need a breather on one side and a pcv valve on the other side, well my pcv valve is at the back of the passenger valve cover and my brake booster is so big that there isnt any room to run a breather. So what i did is i put a breather on the front passenger valve cover and i had an enclose oil filler cap on the front of the drivers side valve cover, but i found a breather/oil cap and i put it on the front of the drivers side valve cover.
So i have 2 breathers on the front of both valve covers and the pcv valve in the back of the passenger valve cover and the back of the drivers side valve cover is plugged off with a gromment. Will this set up be sufficient? I added the breather to the front of the passenger side cover because the breather on the drivers side front my breather/oil filler cap isnt very big on the inside, but i suppose its better then nothing, and i thought a breather on the front valve cover would help get fresh air into the engine.