**Post your in Trunk Battery and Fuel Cell Pics**

Guys, if you buy one of these aluminum cells, take the foam out and throw it in the trash.

That stuff breaks apart after one year, maybe quicker and contaminates your fuel system.

Also, and I learned this while taking my foam out, inspect the entire tank for mental shavings from when the manufactures drilled the holes for the bungs.

My cell had aluminum metal shavings all throughout the bottom of the cell and collected mainly at the lowest portion of the sump near the hose hook ups at the lower rear of sump.

Get yourself a good roll over valve, if not installed from factory and don't fill,the tank up all the way full without the anti slosh foam and you will be fine.

If you fill it full the fuel will expand and the rollover valve will seat and you will have a vapor lock situation......learned that the hard way.

I also installed a inertia safety fuel shut off which trips if someone rear ends you at a red light.
You wire it in series with your electric fuel pump and can mount it anywhere.
Some guys mount it inside the car in case they need to reset it if it trips from hitting a monster pot hole or something like that.