One man hood mount and align.

the way I did mine was to geat a good hold on the hood (duh) from the front and set it up on the hinges (again duh lol) ---It helps having holes in the hood for the hood scoop (actually, it helps a helluva lot having holes in the hood for the hood scoop).
Then I started a bolt in the front hole where it matched up with the hole in the spring on each side, then lift the hood up and put the back bolts in.
Then align as usual.

I actually did it twice last year on my Duster, because after I put it on the first time, I found out that the hinges had been bent over the years sitting, and the hood was about half an inch too far back.