brake pedal too high
FWIW, I don't remember if the donor vehicle had a high pedal. The guy was a mopar guy so for all I know he converted it and used the wrong pushrod.
Brewers has the lengths listed for the ones they sell.
http://www.brewersperformance.com/products.asp?cat=279
I cut and welded mine to 6 1/2" end to end. pedal height is GREAT now!
I also noticed the master cylinder came with one of those o rings so i slapped that on there as well. very happy with the results. I would not recommend cutting and welding unless you know what your doing.
FWIW, I don't remember if the donor vehicle had a high pedal. The guy was a mopar guy so for all I know he converted it and used the wrong pushrod.
Brewers has the lengths listed for the ones they sell.
http://www.brewersperformance.com/products.asp?cat=279
I cut and welded mine to 6 1/2" end to end. pedal height is GREAT now!
I also noticed the master cylinder came with one of those o rings so i slapped that on there as well. very happy with the results. I would not recommend cutting and welding unless you know what your doing.
