rear end question

38 Dodge said
Where can I pick up a book or information on rebuilding this rear end and where can I get the tools and parts that I will need to accomplish this taxk?

You can get a ton of info on the internet, just be specific in your searches.

As far as parts, Dr Diff. http://www.doctordiff.com/

Tools you would need a dial indicator, a spanner to adjust side movement on the carrier, someway to hold the yoke when torquing the pinion nut.

A torsional torque wrench would be helpful but I did mine without it and have no issues.

Here is a few places to start:
Dr Diff aka Cass contributed a lot of info here.

http://www.moparts.org/Tech/Archive/axle.html

Gear set up.

http://www.moparmusclemagazine.com/howto/mopp_0308_mopar_rear_end_gears_set_up/

There is a ton more info to be had. The best thing you can do is read, read, and read some more. I don't know if you are in a hurry of if you have some time to study up on it.

And as always you can ask here. Bookmark this thread and just keep it going.