Arizona Swinger

got the radiator and shroud in yesterday. Not exactly a drop in installation as I had to do some filing on the mount holes of both the radiator and the shroud to get them to line up properly to the core support. Ran into a small problem with the fan and fan clutch......the clutch could not be installed as it was too tall and hit the radiator. Had to find a shorter fan clutch for the application, but still it is only 1/2" from contacting the radiator. Should not be a problem unless the water pump bearing goes out and lets the fan take out the radiator core! Fan blade is about half way into the shroud which is approximately where it should be. Also a picture of the upper radiator hose and how it clears the modified lower air cleaner base with the proper amount of clearance. Ben.