BB oil pump applications

I've run all 3 style pumps and my biggest concern was when using the HP or HV pumps you were always up against the oil pressure relief when the oil/engine were cold. This is fine if the valve works fine but if it fails once that 80PSI oil pressure will be at 120-150 which could rupture the filter can and yes I ran the mopar heavy wall high pressure filters. End all be all is unless you're running 750+ HP (very high rod bearing load) or are into high crank/rod bearing clearances the standard pump is fine. Don't forget to purchase the oil pump rod with the hardened ends for any and all pumps, cheap insurance.