borgeson u joint
i just did mine. got mine from summit racing. you need 3/4"x36 spline for the steering box end and i used 3/4 DD shaft and then i welded and blended it into the factory steering shaft. i still plan to sleeve and pin the joint. this greatly improved the steering in my car. the factory joint in mine was very sloppy. this has ZERO slop.
i just did mine. got mine from summit racing. you need 3/4"x36 spline for the steering box end and i used 3/4 DD shaft and then i welded and blended it into the factory steering shaft. i still plan to sleeve and pin the joint. this greatly improved the steering in my car. the factory joint in mine was very sloppy. this has ZERO slop.