This is not an A-body, but the install will be similar. 1967 Fury III well liner. The top is fastened OUTSIDE the body on C-bodies. I think the A's install from INSIDE. Not sure of that though. The red arrows point to glued surfaces, while the yellow arrows and dots are "floating" points. The orange double arrow is the seat back. The blue arrows are where the strip caulk and metal fastening strips for the top are located. The 3-M #90 spray adhesive works really well here. Coat both surfaces, let it tack up for a few minutes and then adhere the liner to the metal. I did mine at home, took my time and had it all done within a couple hours. That's test fitting, tacking and final install. Hope this helps.
