390 stroker build
Okay, probably not too relevant as I threw a little more $$$ at it.
Mine has the Scat cast crank, I-beams and Icon forged flat tops, clevite bearings and total seal rings, internally balanced with NO mallory metal needed. A stock oil pump with the pick up relocated to the oil pump cover to suit a fabricated aluminum pan from Charlie's oil pans. Ported RHS heads with 2.02"/1.62" valves, and 67cc chambers from Brian at IMM Engines. Billet hydraulic roller with [email protected]" and .402" lobe lift on a 112LSA also from IMM), with Comp Magnum shaft rockers and custom length Manton 11/32" pushrods. Ported Eddy RPM intake with a TMP 1000HP carb. MSD Pro Billet , Mallory Hyfire VI ignition box, ATI Super Damper and a CSR electric water pump.
Modified Schoenfeld 1 3/4" headers.
Okay, probably not too relevant as I threw a little more $$$ at it.
Mine has the Scat cast crank, I-beams and Icon forged flat tops, clevite bearings and total seal rings, internally balanced with NO mallory metal needed. A stock oil pump with the pick up relocated to the oil pump cover to suit a fabricated aluminum pan from Charlie's oil pans. Ported RHS heads with 2.02"/1.62" valves, and 67cc chambers from Brian at IMM Engines. Billet hydraulic roller with [email protected]" and .402" lobe lift on a 112LSA also from IMM), with Comp Magnum shaft rockers and custom length Manton 11/32" pushrods. Ported Eddy RPM intake with a TMP 1000HP carb. MSD Pro Billet , Mallory Hyfire VI ignition box, ATI Super Damper and a CSR electric water pump.
Modified Schoenfeld 1 3/4" headers.
