pictures of the convertible well installed

4spdcuda66 said
These photos may be a little vague. I wasn't specifically trying to show that area when these photos were taken. The metal retaining bar, denoted by arrow 2 in the first photo, fastens the liner to the body in the area of question. The arrows in the second photo point to drain holes that channel water down to the bottom of the quarter panel. The arrow marked "2" in the second photo is resting on the cross brace in which the liner is glued. The last photo almost shows the area where it all meets up. I can get you a better photo of that area if these photos are not enough. Let me know if you need them.

Thanks!
the second pic was the one to help me figure out what and where I have to rework the well liner to work in mine. I've got a little more cutting and buffing to do to get the back half of the car ready for finish work but it's gettin closer!
do you have a drain hole in the lower portion of your quarter? is it in the wheel well/quarter seam? I just looked at mine and didn't see a drain hole to let the water out(that probably where the rust through came from) I'm thinking that I might drill through the bottom of the rocker into the quarter area and weld in a tube that will drain any water that get's in there or through the wheel well and into the quarter.

I'm leaning towards the wheel well tube option since I can shape the end of the tube to NOT pickup water splash from the wheels and to help siphon out the water in the quarter.

View attachment !quARTER drain.jpg

and here's where I'm at now
View attachment 0125131518a.jpg
seats are in and fitted electrical is mostly done, still have to wrap and make pretty.
View attachment 0124131909.jpg

and the well modification is getting finished. still have to hide the ends and the seatbelts, but mostly done!
View attachment 0125131525.jpg