Offenhauser Slant Six Valve Cover f/s

Well, heavy rain kept me out late but I did get some time to get pics of the intake and hedders. The hedders are rusty but its pretty light. One picture shows one of the tubes up close and it shows smoothe metal. This was cleaned with a light wire brush in a couple of minutes. the rust on the rest of the hedders is as thick as this spot was and it cleaned up good. I could take a light brush to the entire pair and shoot some cheapo crap paint on it but I want you to see what these are like. In short, if you are not concerned about appearance bolt them up and go. If you want a decent look have them blasted and coated and they will look very nice. The pictures stink but I think you can see like I said. No dents, no flat tubes by the steering box or on the bottom like almost every other set I have seen.

The intake is dirty and will be cleaned up but its all there including the carb plate. One hole on the plate was thin on the threads and this one required a bolt going all the way through it. No biggie as you wont see it when the carb is on the intake and its on the car. If you are a perfectionist like me I would tap the hole a bit with a slightly larger tap and make a stud work correctly in the plate but thats me. Well, thats about it. I will get try to get some weights on this Wednesday after work. I do not have any kind of box for the hedders but do for the intake.
Chas.