A body front end body dollies

I can build them.... my dad has this ultimate set of tools... sorry, spicolli flashback. :)

I would need the center to center spread on your bumper bracket bolts.

If you want the car level, get the rocker level and get me these measurements.

1) From center of front bumper bracket bolt to ground and

2) from rear spring mount lower bolt hole to ground.

3) yoke to ground.

I can build it off those measurements. If you want it a bit taller let me know how much.

I'd need to know the bolt pattern for the casters you plan on using. The ones I normally build are 4.5' x 4" plates.