progress pics
Drilled and tapped a hole for the 180 deg temp sender. Also put a 90 deg 3/8 pipe 6an fitting on the fuel pressure regulator. (was a 45 but hit the intake after removing carb spacer)
Need to figure out something different for the upper radiator hose.
The lower hose is getting a bung welded in tomorrow. (tig welder needed so i'm told) I have a piece of exhaust pipe between the radiator and water pump. Dual purpose cavitation/petcock.
replaced the 1" spacer with a 1/4" edelbrock gasket. Switching back to the flat hood for a more stealth appearance.
Drilled and tapped a hole for the 180 deg temp sender. Also put a 90 deg 3/8 pipe 6an fitting on the fuel pressure regulator. (was a 45 but hit the intake after removing carb spacer)
Need to figure out something different for the upper radiator hose.
The lower hose is getting a bung welded in tomorrow. (tig welder needed so i'm told) I have a piece of exhaust pipe between the radiator and water pump. Dual purpose cavitation/petcock.
replaced the 1" spacer with a 1/4" edelbrock gasket. Switching back to the flat hood for a more stealth appearance.
