Brake caliper help?

I am changing over the 72 Demon from drum to disc front brakes. I odered calipers from a 75 Dart Sport and I had to located them on the rear of the disc due to clearance issues with a factory installed sway bar which I do not want to compromise. I swapped the calipers sdie for side so the bleeders were at the top, but now the connection for the brake hose seems to be very close to and looking directly at the upper ball joint knuckle and leaves little room to get a hose to sweep back toward the frame rail connection. I read somewhere that if I got a caliper from another later model car, it would fit fine and the hose connection actually is tapped into the side of the round housing area on the caliper. Can anyone on here tell me what make model year caliper I should be looking at to do this. These are slide style, not pins. Thanks