Turbo 383 in a A-body Barracuda

leathermandan said
ok thats definitely what i needed to know i already have a SADA 3000 gun that i'v been using to spray Harley's with it makes painting sooo much easier that sounds kinda weird about mixing the paint the web sight i was on has the formula's for all the PPG 1968 QQ1 paint showed enamel lacquer and a base coat clear

on anther note put power to my dash tonight and lit it up I really like how it turned out

That dash look fuggin' Sweeeeet dude!!!! Two thumbs up!!

Again, the paint you have is a urethane basecoat. Shopline by PPG. They may be able to mix it in laquer and enamel but don't use that over what I have already sprayed unless you seal it first.

I would stick with the basecoat that I gave you and get a quality clear such as the two I listed. If you do need more color just get the same Shopline.

By the way, the first time I had that gallon of QQ1 mixed it was way to light like B5 blue.

I had to get it darkened to match the original QQ1 color. You can spray a test panel cleared and get them to match up another gallon if you need it. That gallon I gave you cost me less than $100 at my shop cost!

Your clear is what you don't want to skimp on. It's the protection for the color coat. The better the clear, the longer it will last!