408 stroker

408 stroker short block + indy X heads all machine work done by Shady Dell Speed Shop

block has been line honed, square decked to 9.585"
bored and honed to 4.030 with ARP main studs
stroker clearanced
enlarged main oil feeds to 5/16
brass freeze plugs
internally balanced Scat forged 4340 crank
eagle H beam rods
Wiseco Pro Tru pistons (these were used)
file fit plasma moly rings
also comes with new kevco oil pan and pick up

The heads are indy X for La rockers
Heads have 2.055 int and 1.625 ex valves
intake valves have been back cut and the 5 angle valve job has been blended to the bowls. The heads were not flowed but Ryan said he did a few sets this way and they flowed upper 260's to 270
heads have also been cut to 60cc chamber for between 10.45:1 and 10.65:1 depending on which head gaskets are used.
heads are set up with springs for use with .600 lift flat tappet
10 degree moly locks and retainers

The reason i'm selling is to build a 6.1 hemi


will not ship,motor is located in Hyndman Pa area code 15545
Pm here with any ?'s

PRICE $3800 OBO