Predator Carburetor Wanted

I ran one on a 351C Ford in a 57 Fairlane. I think I pulled about 6 mpg, they are $100 all day long out here at Pomona swap meet. The stainless hardware polishes up nice on those, I used to restore them. Hard to make the cast plate shine though with that eagle casting. Good luck, I was thinking it would be a great base for a 4 injector TBI setup. Careful of the metering block, they tend to break at the ball socket, and if you use a spring to put some tension on it, you dont have to hassle with the "turn 1/4 this way, back off 1 full turn and turn again" nonsense to lower the block. Tyy to find the one with the idle screw. I think its the PX1000i or something with an i in the title. It has an extra idle circuit that can be bought and retrofitted to the original.