Hei conversion Intermittent start?

magnumdust said

But I would not get sidetracked until you get this cleaned up some. I would do following: Get the module mounted, and get the distributor pickup wire cleaned up, shortened if possible, and TWISTED. DRESS the distributor wire along the firewall which adds some SHIELDING affect, rather than dangling it out into thin air

Um, you have seen the several times where i posted that the wiring looks this way because of testing? I get the feeling you've missed that.

Click to expand...

I understand your just testing it but think your missing the point that the whole problem could be just because of the sloppy wiring. Like me and others mentioned the wires from the pickup coil should be twisted. That means all the time, even while testing, because at any time they can attract RF that will screw up the signal. And the piece of metal you have the module screwed to is not enough heat sink, even for test purposes. Those modules generate a fair amount of heat pretty quickly that needs displaced.