Performance and Race Parts

Thanks for all the responses. Yes this ad is old but still have some things left.



Pair Cragar Super Tricks - rears - 15" x 13", 6-1/2" back space, 4-1/2"-4-3/4" bolt circle. Drilled for screws. $250

NEW Speed-Pro R9278+.035". File fit, plasma moly ring set. 4.350" bore. 1/16 x 1/16 x 3/16 with low tension oil rings. $90. (summit @ $123)

New Moroso solid motor mounts for B,C & E bodies for all V8s except hemis. Part #62520. $25

MSD 8739 2-step module. $35

Take-off 3.9 liter V-6 stock valve covers from 1991 - only 10K miles. $5

New Mopar Performance P4120459 1/2" head bolt washer kit. $10

2.74 first gear/low gear set for 904/999 torque-flite transmissions. Get off the line quicker. $100

New Rhoads lifters for Mopar V-8 #20118. $75 Sale pending

New 8-3/4" or Dana 60 Axle retaining plates(pr) $5 For 'Green' type ball bearing.

New Elgin 383-400 moly pushrods for adjustable hydraulic lifters. Cup & Ball ends. 8.300" overall length. $75

Manton RB BB Mopar Pushrods 3/8" heavy wall. Cup & Ball ends for adjustable rockers. Set of 16. 8.710" 'Effective' length or 8.780" overall length. Low runs-like new. $100

New TCI 5.0 ratio Band Apply Lever for 727 & 904 Torque-flite transmissions. $20 One left.

RJS Mesh diagonal window net, Used 4 times. SFI expired. $15

S.B. Mopar 273 factory connecting rods. Used in other small blocks for lighter weight rods. $80

NEW Manton series 4 heavy wall 8.900" x 3/8" pushrods. Ball/ball ends, hardened tube. Never used. Set of 17. $150 OBO $225 New.

SB Mopar Adjustable Pushrods for hydraulic lifter and stock type rocker - Ball ends. 15 good...1 Bad. $50

1967 440 Engine block D440 Dated 4-7-67 if someone needs a correct date coded block for a restoration. $500. Heads and intake also available.

Brand NEW 1996 Dodge Dakota truck frame. **BARE** For 2 wheel drive short box. Cut off at rear axle...have rear section(approx 3ft). You Haul! Want rack and pinion & A-arms on a street rod? $50 **What do you have to trade??**

TRW Forged 340+.030" (4.070" bore) 12.5 compression domed pistons. Litened and gas ported. 1/16" rings. Takes .990" BBC wrist pins (not included). SBM is .984" pins, hone your rods .006". BBC pins have more available wall thickness & lengths. (Almost $500 in litening, gas porting and boring wrist pin holes.) $125 or make an offer/trade.

Also have some 833 4 speed parts. 1966 or 67 main case, 307 bearing and tail housing. Cluster gear and some misc.

Thanks FABO!