Dash harness meltdown help

Hey Scotty, you can change the wires in the circular plug easy enough, just push the wire so you are just pushing the terminal out of the end of the plug, then just wiggle the wire through the slot in the plug. After you get all of the wires out of the plug, work with your wiring shematic and rearrange the wires in the plug according to their corresponding color on the diagram of the plug for your year car. Remember to orient the plug on the cluster according to the locating tab, and mark the colors on the plug because it is a mirror image when you pull off the plug and look at the end!!

Hope this helps...and I have a 64 harness if you need it, but it's not out yet so I can't comment on the condition as of yet!! geof