Just wanted to build a nice street cruiser. Scat 4" crank with Scat Ibeam rods and Icon forged dished pistons. Lunati voodoo 60404 flat cam with roller rockers and the Edelbrock closed chamber heads. Bored 30 over the 340 will become a 416. Tranny has a B&M TransPak and I had the torque converter built with about a 2500RPM stall. Carb is a 750 sitting on the special Nascar Edition Performer Air Gap. Double roller chain and high volume water pump. I intend on installing a Griffin aluminum radiator. Compression ratio should be about 9.6:1. I have no clue what the HP or torque will be. Anybody want to guess?