408 dyno report and build sheet

Just had time to post the dyno report for my new 408. It will be going in a back-half 72 Duster that should come in at about 2600 lbs. I hope to see the nines for the 1/4.
Brian at IMM did the head and intake work, Indy 360-1's flowed 328 at .700, Indy intake, Ferrea 2.08 x 1.60 valves, T & D 1.6 and 1.7 rockers. Motor: Comp solid roller cam, Hughes main stud girdle, Ross pistons 99789 (coated), Eagle 4340 crank and H rods (coated). Compression at 13.5 to 1, Tall block fill, lifter bores bushed with 8043-16 roller lifters. Oil mods: Kevko rear sump oil pan M202 with gates and windage tray, 3/8" lifter bore oil crossover tube, oil thru Manley 5/16 moly push rods, (blocked head oil ports), blocked #1 main oil from right lifter bore. TTI 1 7/8 headers, MSD pro billet, Quick fuel 1050 carb, Moroso vac pump.