Bolt in Harness Bar don't do it!!!
What are you intending to do with this car? Drag race, Auto-X, Road Race (or track event)? Do you intend to use a Hans device?
From your photo, applying rules from NASA, SCCA and many other sanctioning bodies (assuming a harness bar is allowable):
1) Your belts are at too high of an incline from the driver in the seated position. Belts should attach to the mounting point at an angle 90 degrees from the plane of the driver's spline to no more than 20 degrees LOWER than the 90 degrees from the drivers spline plane. Too high you may be ejected from the harness during an incident, too low and your spine may suffer serious compression during and incident.
2) If the distance from your shoulders to the mounting point is more than 18", the shoulder belts should be crossed from the mounting to the seat. (Keeps you under the belts)
3) Unless your seat is FIA rated, a seat-back brack is required (normally from the seat back to the roll cage cross bar - to keep the seat from hingeing in either direction during an incident).
Don't get me wrong, we are not trying to throw you under the bus, rather are just concerned for your overall safety. We want you to be able to walk away from anything that you may encounter! :thumbrig:
