65 Barracuda Gasser + 1956 325 Dodge Hemi Build

spent the night working on the short block and did accomplish a couple of things. The crank is set and plasti-gaged in.....it spins great. Clearances are all within specs! We had some good intentions of getting all the pistons and rods in too, but you know what they say about good intentions. Anyway after getting on whole side in there was a small hiccup discovered! The piston skirt was hitting the crank counter weight on the # 2 cylinder! We then checked closer and nearly all the loaded pistons were really close to the counter weights. It is almost like we are dealing with a stroker crank.........
It is an easy fix, just remove all the pistons and take some material off the skirt, but just one of those things!
Got some more pics.....here they are.