65 Barracuda gauge problems

Ok everyone, Because of the ridiculous amounts of snow we got here in Kansa slowed me down in making progress in my tracking down of the problem I am having with my gauges on my 65 cuda. This is the stock setup cluster, not the rallye. I pulled the cluster out of the car today and dissasemled it What I found is a bad spot on the printed circuit board. Not sure if its repairable. Hopefully someone out here can help me in this. I am pretty sure this is the problem. I am including the pictures of what I have found. The bad spot is in the middle of the pins where the main harness plugs into the cluster. The bad spot is one of the copper foil pathways that carries current to the gauges and dashlights. The foil pathway appears to lead to the output side of the limiter plug in spot. Can you guys study the pictures and maybe throw in your opinion as to whether this is the whole reason I have no fuel or temp gauge. Also, I would like to test the gauges to see if they are fried or not. Im assumong this is done with performing an ohms test. Does anyone have those numbers? Thats for the help everyone!

Bill