70 Dart barn find

OK, I'd have thought someone else would have answered by now. Here is from an original 70 Swinger quarter. I would think you could work with just the holes I'm giving you, but if you need the other holes, I can measure them too. Drill these, line up the emblem and it should give you the others. Especially since some of the repop emblems don't have as many holes, and I don't know what you have:

Driver's side:

Dart emblem: left hole (of 2): 11 7/16" in from the door jam
3" down from top of the quarter right above that.

Swinger emblem: leftmost hole (of 4): 14 7/8" in from door jam
5 1/4" down from top of quarter
rightmost hole (of 4): 20 5/16" in from door jam
4 1/4" down from top of quarter

And when I say the top of the quarter, I mean the ledge at the top, where I hung the end of the tape measure from in order to measure down to the hole. By door jam, since it curves, I mean hanging the tape measure end straight to the left of the hole.

I hope this helps.