Proposed cam specs

It will work well. Converter always helps, get the base idle tune up right and it will run well.

Not apples... Here's a build using some brodix, like ede's, and a comp XR268HR cam
http://www.forabodiesonly.com/mopar/showthread.php?t=225372

Pay attention to valve to piston clearance if sticking with stock slugs. It's not the dish that's an issue, it's the raised edges that will get you. Depending on static compression, I'd be putting that cam in around 106 ICL or even cut it on a tighter LSA to get the intake valve closed sooner.