just wondering were did you run the end of that vent tube did you drill into the fill tube or run it next to it under the cap mine is not hooked up either and will have to do something with my vent also
It comes off the stock vent nipple on the tank, runs up the filler neck and there is a splice with a rubber hose that connects the looped section. The end of that tube exits to the bottom of the car. I ordered a small lil filter that will go on the tube end where it exits under the trunk pan. I will be adding a grommet where the tube goes through the trunk pan, Ill post pictures of it when its all done. it hangs down about 2-3". My Sand Rail gas tank was vented like that to the bottom of the car. At the end of that tube a Piece of a sponge was zip tied to it.
